Category Archives: Under the Keel….

The Urban Oarsman & Son build a Canoe, part eighteen…………. Varnishing the seats and carrying yoke, taking the hull off of the strongback/moulds, taking apart the strongback.

The seat frames and carrying yoke have been given a coat of epoxy resin.  We let them cure for several days.  I then give them a light sanding and begin varnishing. I put eye-hooks in one end and hang them … Continue reading

Posted in Under the Keel.... | Leave a comment

The Urban Oarsman & Son build a Canoe, part seventeen…………. Seats and carrying yoke.

While the epoxy cures, between applications, I make up the canoe seats and carrying yoke.   With the price of wood these days (and yesterdays too) I always make up a cutting plan before I start to cut.  Helps me … Continue reading

Posted in Under the Keel.... | Leave a comment

The Urban Oarsman & Son build a Canoe, part sixteen ………….“Fill the weave, fill the weave”…………..

The initial epoxy & cloth coat is “cured”.  No longer sticky to the touch.  This is a “green” cure, the epoxy is still soft.  We will get a chemical and mechanical bond to the first coat.  I trim off all … Continue reading

Posted in Under the Keel.... | Leave a comment

The Urban Oarsman & Son build a Canoe, part fifteen……….. “Poxy day”

We have sanded the canoe to death.  All the curves look smooth and we are getting to the point where sanding the canoe any more will just put dips in the wood between the mould stations and between the harder … Continue reading

Posted in Under the Keel.... | Leave a comment

The Urban Oarsman & Son build a Canoe, part fourteen…Outer Stems.

Having sanded the hull, the next step is to attach the outer Stem pieces.  I bought a rough cut, smooth two face  1″ by 6″ 8′ oak plank.  There will be enough wood in this piece for the stem strips, … Continue reading

Posted in Under the Keel.... | Leave a comment

The Urban Oarsman & Son build a Canoe, part thirteen. Stripping the West side….

Stripping the West side of the canoe was much harder than the East side.  After the first four, every strip had to be fitted, with a bevel on each end of the strip. Strip one goes on….. To increase the … Continue reading

Posted in Under the Keel.... | Leave a comment

The Urban Oarsman & Son build a Canoe, part twelve.

A lot has happened since the last post.  I decided that rather than posting after every strip, I would post when we  trimmed off the planks extending over the centre line part. We have to start trimming the ends so … Continue reading

Posted in Under the Keel.... | Leave a comment

The Urban Oarsman & Son build a Canoe part eleven.

Just a quick post here, putting on strip 18. We have already chosen the next two strips, they are sitting on top of the canoe. Paul then glues up the coves and we tighten up the straps, and begin taping … Continue reading

Posted in Under the Keel.... | Leave a comment

The Urban Oarsman & Son build a Canoe part ten.

Another weekend and we have been plugging away, one strip at a time.  We had Thirteen  strips on and we have put on a strip every day or so and today we are putting on the Seventeenth. We get ready … Continue reading

Posted in Under the Keel.... | Leave a comment

The Urban Oarsman & Son build a Canoe part nine.

It has been slow but steady going…One strip at a time. To make putting the clamps on easier, I glue the angle iron to the squeeze clamps for the stems. I was at “Wooden Boat Alley”, the Vancouver Wooden Boat … Continue reading

Posted in Under the Keel.... | Leave a comment